cs_playm89
Messages postés13Date d'inscriptionsamedi 29 novembre 2008StatutMembreDernière intervention 5 juin 2011
-
18 avril 2011 à 17:10
cs_playm89
Messages postés13Date d'inscriptionsamedi 29 novembre 2008StatutMembreDernière intervention 5 juin 2011
-
18 avril 2011 à 18:34
salut je suis en cours de réalisation mon projet fin d'étude sur "réalisation d'un serveur sms avec java j'utilise l'API SMSLIB voici ce code et pour l'envoi d'un sms a u numéro
import org.smslib.*;
class SendMessage
{
public static void main(String[] args)
{
// Define the CService object. The parameters show the Comm Port used,
// the Baudrate, the Manufacturer and Model strings. Manufacturer and
// Model strings define which of the available AT Handlers will be used.
CService srv = new CService("COM6", 110, "Sony Ericsson", "Z530i");
System.out.println();
System.out.println("SendMessage(): Send a message.");
System.out.println(" Using " + CService._name + " " + CService._version);
System.out.println();
try
{
// If the GSM device is PIN protected, enter the PIN here.
// PIN information will be used only when the GSM device reports
// that it needs a PIN in order to continue.
srv.setSimPin("");
// Some modems may require a SIM PIN 2 to unlock their full functionality.
// Like the Vodafone 3G/GPRS PCMCIA card.
// If you have such a modem, you should also define the SIM PIN 2.
srv.setSimPin2("0000");
// Normally, you would want to set the SMSC number to blank. GSM
// devices get the SMSC number information from their SIM card.
srv.setSmscNumber("");
// If you would like to change the protocol to TEXT, do it here!
// srv.setProtocol(CService.Protocol.TEXT);
// OK, let connect and see what happens... Exceptions may be thrown
// here!
srv.connect();
// Lets get info about the GSM device...
System.out.println("Mobile Device Information: ");
System.out.println(" Manufacturer : " + srv.getDeviceInfo().getManufacturer());
System.out.println(" Model : " + srv.getDeviceInfo().getModel());
System.out.println(" Serial No : " + srv.getDeviceInfo().getSerialNo());
System.out.println(" IMSI : " + srv.getDeviceInfo().getImsi());
System.out.println(" S/W Version : " + srv.getDeviceInfo().getSwVersion());
System.out.println(" Battery Level : " + srv.getDeviceInfo().getBatteryLevel() + "%");
System.out.println(" Signal Level : " + srv.getDeviceInfo().getSignalLevel() + "%");
// Lets create a message for dispatch.
// A message needs the recipient's number and the text. Recipient's
// number should always be defined in international format.
COutgoingMessage msg = new COutgoingMessage("+243991372231", " Hello ! voici le test du logiciel que j'aie exécuté pour envoyer des sms. Be blessed. Bovy's.");
// Set the message encoding.
// We can use 7bit, 8bit and Unicode. 7bit should be enough for most
// cases. Unicode is necessary for Far-East countries.
msg.setMessageEncoding(CMessage.MessageEncoding.Enc7Bit);
// Do we require a Delivery Status Report?
msg.setStatusReport(true);
// We can also define the validity period.
// Validity period is always defined in hours.
// The following statement sets the validity period to 8 hours.
msg.setValidityPeriod(8);
// Do we require a flash SMS? A flash SMS appears immediately on
// recipient's phone.
// Sometimes its called a forced SMS. Its kind of rude, so be
// careful!
// Keep in mind that flash messages are not supported by all
// handsets.
// msg.setFlashSms(true);
// Some special applications are "listening" for messages on
// specific ports.
// The following statements set the Source and Destination port.
// They should always be used in pairs!!!
// Source and Destination ports are defined as 16bit ints in the
// message header.
// msg.setSourcePort(10000);
// msg.setDestinationPort(11000);
// Ok, finished with the message parameters, now send it!
// If we have many messages to send, we could also construct a
// LinkedList with many COutgoingMessage objects and pass it to
// srv.sendMessage().
srv.sendMessage(msg);
// Disconnect - Don't forget to disconnect!
srv.disconnect();
}
catch (Exception e)
{
e.printStackTrace();
}
System.exit(0);
}
}
maintenant mon problème je veux l'envoi d'un sms a un groupe enregistrer dans une base des données comment je peux faire ca et merci d'avance
